Oil Base Mud Products
PRODUCT NAME
PAL ORGANOCLAYS*
| Description | Organophilic clay, Viscosifier and gelling agent |
| Function | Impart viscosity and suspension properties to oil base drilling fluids, for improving cutting-carrying capacity and to provide long-term suspension of weighting agents. |
PAL ORGANOLIGS*
| Description | Amine-treated lignite, HT filtration control Additive |
| Function | High temperature filtration control agent, act synergistically with emulsifiers in conventional invert emulsion systems to enhance the overall emulsion and thermal stability. |
PAL PHALTS*
| Description | Asphaltic resin, Filtration control Additive |
| Function | Provides filtration control, seal low-pressure and depleted formations, also improves overall emulsion stability, thermal stability and suspension characteristics of oil base mud. |
PAL PHALT HTS*
| Description | Blend of Lignite & Asphaltic resin for HTHP filtration control |
| Function | Provides HTHP filtration control, seal low-pressure and depleted formations, also improves overall emulsion stability, thermal stability and suspension characteristics of oil base mud. |
PAL TANNIN QM*
| DESCRIPTION | Amine-treated tannin-Quebracho, HT filtration control additive for OBM & SBM |
| FUNCTION | High temperature filtration control additive for use in any oil- or synthetic base mud systems with minimal effect on rheological properties of mud. Temperature stability is up to 500°F (260°C). |
PAL MUL PM*
| DESCRIPTION | Primary Emulsifier & Wetting Agent |
| FUNCTION | Provides excellent emulsion stability, secondary wetting, filtration control and contamination-resistance of oil mud system |
PAL MUL SM*
| DESCRIPTION | Secondary Emulsifier |
| FUNCTION | Multi -functional additive serves as secondary emulsifier,wetting agent and filtration control agent in oil mud systems. |
PAL MUL NTM*
| DESCRIPTION | Non TOFA base multipurpose Emulsifier |
| FUNCTION | High Temperature stable invert emulsions, secondary wetting, reduce HPHT filtration, improves thermal stability and resistance to contamination in oil mud systems |
PAL MUL P-HTM*
| DESCRIPTION | Highly concentrated high temperature stable primary emulsifier |
| FUNCTION | Provides excellent emulsion stability, secondary wetting, HTHP filtration control,high temperature stability and contamination resistance of oil mud systems |
PAL MUL S-HTM*
| DESCRIPTION | Highly concentrated high temperature stable secondary emulsifier |
| FUNCTION | Multi- functional additive serves as secondary emulsifier, wetting agent and HTHP filtration control agent with improved thermal stability in oil mud system |
PAL THINM*
| DESCRIPTION | Oil mud thinner for reducing the viscosity & gel strength |
| FUNCTION | Reduces viscosity and gel strength in oil base mud caused by high content of colloidal solids, without the need for charging the oil/water ratio. |
PAL MODM*
| DESCRIPTION | Rheological modifier to increase LSRV, yield point, gel strength & carrying capacity |
| FUNCTION | Enhance LSRV and gel strength for improved cutting-carrying capacity in large-diameter high-angle, horizontal and extended-reach wells. Improved shear thinning, thixotropic characteristics without using additional clay-base additive and reduce fluid loss in oil base mud |
PAL VIS OBMM*
| DESCRIPTION | Polymeric viscosifier for increasing yield point & gel strength with minimal plastic viscosity |
| FUNCTION | Provides elevated yield point and gel strength with minimal increase in plastic viscosity there by minimize the amount of clay in formulation and improves LSRV to increase shear thinning, thixotropic characteristics oil base mud. |
PAL WETM*
| DESCRIPTION | Oil wetting agent for improving oil wetting of solids & emulsion stability |
| FUNCTION | Power oil wetting product used to oil wet drill solids and weighting agents in oil-based drilling fluids |